Відео

For all of you that DONT KNOW this IS an older version of “WALTHER P 22”. The new version has a completely new sring it’s much shorter and stiffer !

absolute legend

In Los Angeles!

2 for $10 at target every day.

This was very helpful! You are a hero for putting out videos that make it easy for a non-professional like me to save money by making simple repairs myself. Thank you!!!

This is a great video and thank you for making it. I think I have a very similar washing machine. I am wondering if I can disassemble it to clean the washer drum. I have a child with excema and I am afraid he could be reacting to the residue I just learned is lurking behind the shiny silver drum. Do you think this is possible or should I buy a new washer. I am pretty handy and have fixed a few of my other appliances with the help of my UA-cam heroes. My washing machine is from 2014 but is going strong and has no other issues. Thank you!

10 year old video and you're still answering viewers questions! That's viewer commitment 👍

This is not the same for a 07 1300c. But it sure does help! Thank u

Bruh THHHHHAAAANNNNNKKKKKK UUUUUUUU!!!!! I feel so dumb lol

Thank you for posting this, we’re camping in New Mexico on our way to the Grand Canyon and our one roof unit isn’t cutting it lol. I wasn’t sure how to add the power wire to the existing camper wiring, this helps a ton!

OMG thank you I was starting to feel dumb trying to get it off 😂

Or would you know were to get a new housing out

Can I buy this housing from you

Thanks for a great series! Your 'show & tell' was clear, concise & to the point. 😉👍👍

Thanks Bro.!

Do you have any updates for newer thermostats? I’m at a brand new Hilton and even with it set to E-0, it is still shutting off constantly. The config menu has three large numbers and one small number now.

I am a 63 years old lady trying to learn how to cut baseboards corners your explanations is fantastic I'll try it.

Ugh my apartment Honeywell thermostat says 86° inside. It was 82° yesterday. I can’t figure it out im sweating up a storm!

What are the size screws and holes you drilled?

Glad I watched this. Was afraid I'd have to take tank off. Now I just have to find the seal. Local hardware stores don't carry I lot of parts for Mansfield equipment.

Excellent video. Thank you

what grease do you use?

I noticed you did not seal off the AC unit from the open gap in the roof? It will pull/push air into the ceiling void, will it not?

Saved me and my little ones a HOT stay in a hotel! For as much as it cost me to stay the night here there should be no restrictions on temperature!! We more than contributed our share of the electricity bill for the month imo 😂 Many thanks! Simple and concise, no frills or clickbait! Awesome!!!

you forgot to show how to 'LEARN' the ET310, instructions on the handle.

Thank you!!!!

What's the part number mine is broken 😭

Hell yeah 3:36 in and new element in place. Not gonna watch the rest because just watched it in person. thanks

I’m curious the time they took out of your life. Would my time be better spent picking up a new one at the store for $5? And I can spend my hour working and making $100 in that hour???

Can you please share the link were you bay?

This is very informative, thank you . Would it be similar to a 2015 Chevy equinox by any chance? @funbro1

Looking to get this done this weekend on my '04. Thanks much!

The Turkey injector is a gobble.

Is the installation different for every door? Or is it the same? Ive been thinking about doing this myself for all 4 doors on my equinox but im a little intimidated.

June 19: (FYI, the 3 door bolts are T30 torx , not T27) Just started on this project today..wow is it ever hard to see what the heck is going on behind the inside door section where those three T30 torx screws for the actuator are !! ~Edit June 20: The MOST difficult part ATM is at 3:41....getting that useless piece of plastic out of the way..how does one even begin to figure out the procedure in removing it... there is no mention of how to unclip it /pry it/ or what direction to move/ remove it.. (As the guy says in video, just delete installing this POS plastic, it serves no purpose & was installed by someone with insanity issues. ~Edit June 21 The worst part about this job ultimately is the dam window guide..it's just simply rigidly & stuck stubbornly in the way for removal / installation of the actuator. SO, i went one step further, i removed both inside & outside of those two little triangle window pillar covers . Removing these gives you access to the top 10mm bolt that holds the top of the window guide. To get it pulled/moved up out of the way for actuator clearance: snip a little rubber tit that goes through the window guide metal with side cutters (cut pointy edge, not part where it gets inserted) and pry it out of the hole (it will still re install properly, as there is still lots of rubber to re insert & do it's job), Then pull on the top of guide & a little sideways at same time while having other hand also pushing up and MAKING sure it is clearing actuator area cleanly from bottom..can only do this by feel / you won't be able to see shit. When the top of guide is pulled up about 7", leave it there, you now have MUCH more room to get the dam actuator job done ~Edit I finally finished putting everything together and it's all now working great, but i must say: I found this entire job high on the stress list, a person pretty much needs 3 arms but only one body present a there is no room for another person. Getting the rods in the correct orientation and spending hrs getting hung up on itself/linkages involved lots of cussing & saying "Why the hell did they do this /that". It's definitely a very shitty task to take on !

Thank you so much ,, very helpful video!

What hole saw bit did you use a carbide or wood?

I have a hairline crack on the glass-where can I find replacement for the glass?

Thank you. Perfect example of my dryer.

what does the thread locker do?

Liked an subscribed for a 3 year old video, that's how useful this was. Thanks!!

Did it really take you a whole day just to get that far?

How can I get your fenders for my C

Great thanks

Great video, what model Dometic is that?

magnificent!

So how did you fix the problem? It looked like you just took it apart & then put it back together with the same parts. Update on my Honda, I had the same problem it would not roll backwards at all & all I did to fix it was I took both back wheel's off & took some WD-40 & soak it down, sprayed it real heavy where the axle goes into the bearing, let it sit for about an hour & now it rolls backwards like new.

Very good idea.

Did the acc work afterwards?